Gate Automation
-
BFT-FCS
List Price Incl. VAT: £312.24 £227.68 (£273.22 inc vat)
Foundation box for sub 230v 130 deg operation
Download Datasheet -
GA-T35/80
List Price Incl. VAT: £16.00 £11.66 (£13.99 inc vat)
T35/80 extended upright gate joint for wrap around hinges. Extended joint 80mm, 33.5mm diameter. For 40mm box section
Download Datasheet -
BFT-DAMPY-B-700X219
List Price Incl. VAT: £3,318.25 £2,419.56 (£2,903.47 inc vat)
700mm x 219mm manual gas bollard complete with LED light crown
Download Datasheet -
BFT-ARES-ULTRA-BT-A1000-KIT
List Price Incl. VAT: £1,224.46 £892.83 (£1,071.40 inc vat)
The Ares Ultra BT range holds two 24v automatic sliding gate operators, which are both available in kits. Suited to gates weighing up to 1000kg equipped with a leaf speed of 9m/min. Featuring a magnetic limit switch and built-in obstable detection through the D-Track system both of these gate operators are suited for long-lasting intensive use.
Download Datasheet -
FAAC-KIT-770-24V-S
List Price Incl. VAT: £1,388.40 £1,157.00 (£1,388.40 inc vat)
FAAC 770 24V KIT S for a single residential swing gate up to a maximum of 3.5m each leaf.
Download Datasheet -
NICE-PCELL-EPMB
List Price Incl. VAT: £92.70 £67.59 (£81.11 inc vat)
Download Datasheet -
BFT-E5-BT-A18-TWIN-KIT
List Price Incl. VAT: £1,466.90 £1,069.62 (£1,283.54 inc vat)
The E5 is an extremely compact non-locking 24V electromechanical operator with articulated arm for pedestrian swing gates, suitable for residential and commercial areas. The compact dimensions allow the E5 BT A to be installed on small pillars and columns (minimum required width 8cm). Suitable for 1.8 metres wide and up to 100kg.
Download Datasheet -
GA-53
List Price Incl. VAT: £2.09 £1.52 (£1.82 inc vat)
Joint pin for the sistema tracks
Download Datasheet -
BFT-PCPOST-PHP
List Price Incl. VAT: £83.27 £60.72 (£72.86 inc vat)
Photocell post for the Desme Thea Eris & Akta photocells
Download Datasheet -
BFT-LEO-B-CBB
List Price Incl. VAT: £410.17 £299.08 (£358.90 inc vat)
The Leo CBB is a control panel for 230v sliding gate operators. The control panel is in-built to the Icaro Smart and Icaro Ultra operators.
Download Datasheet -
NICE-KIT-ROBUS-3
List Price Incl. VAT: £1,064.89 £776.48 (£931.78 inc vat)
This is an easy to install sliding gate kit which is suitable for gates up to 1000kg in weight.
Download Datasheet -
FAAC-1045611
List Price Incl. VAT: £1,304.40 £1,087.00 (£1,304.40 inc vat)
The FAAC model 560 operator automates two-leaf folding doors with one operator (fig. 2-4-6) or four-leaf doors (two-leaf units oneach side) with two operators.
Download Datasheet -
FAAC-108722
List Price Incl. VAT: £1,129.20 £941.00 (£1,129.20 inc vat)
FAAC S800H is an automated system in a hydraulic enbloc (CLASS III), permitting vehicle access through swing leaf gates which, when installed invisibly in the ground, does not alter the appearance of the gate.
Download Datasheet -
FAAC-108760
List Price Incl. VAT: £583.20 £486.00 (£583.20 inc vat)
The 750 CP for swing gates, utilises a load bearing foundation box, suitable for gates up to 3.5m leaf length with single-leaf max weight of 800kg
Download Datasheet -
BFT-STOPPY-MBB-500
List Price Incl. VAT: £4,346.81 £3,169.55 (£3,803.46 inc vat)
500mm x 219mm electromechanical automatic bollard complete with LED light crown
Download Datasheet -
BFT-KIT-ICARO-ULTRA-AC-A2000
List Price Incl. VAT: £1,529.40 £1,115.19 (£1,338.23 inc vat)
Mechanical sliding gate motor suitable for domestic, multi-user and industrial applications.
Download Datasheet -
BFT-KIT-ELI-AC-A40-S
List Price Incl. VAT: £1,089.77 £794.62 (£953.54 inc vat)
The Eli AC is available in a range of 230V electromechanical underground operators which are suitable for intensive usage. The A40 model is suitable for 4 metres wide and up to 500kg. With slowdown on its opening and closing cycle, the motor can protect itself and reduce noise by not banging into hard stops. As the motor nearly reaches the open and closed position it will start to slow coming to a gentle stop.
Download Datasheet -
GA-SISTEMAZ3
List Price Incl. VAT: £55.68 £40.60 (£48.72 inc vat)
Concrete down ground track for sliding gates and industrial doors, 20mm round for O groove wheels, supplied in modular 3m lengths, galvanised finish. Multiple lengths are precisely aligned using the 53 joint pin.
Download Datasheet -
BFT-KIT-ELI-BT-A35V
List Price Incl. VAT: £1,628.53 £1,187.47 (£1,424.96 inc vat)
This electro-mechanical double kit is suitable for leafs up to a width of 3.5 m up to 200kg in weight. With slowdown on its opening and closing cycle, the motor can protect itself and reduce noise by not banging into hard stops. The Eli models are equipped with physical stops in both directions and as standard can operate gates up to 120° and designed for private residences and small apartment blocks.
Download Datasheet -
GA-2GSRF
List Price Incl. VAT: £220.55 £160.82 (£192.98 inc vat)
Download Datasheet
