Gate Automation

FAAC-785535

List Price Incl. VAT: £77.76 £64.80 (£77.76 inc vat)

Wire-in Decoder Board compatible with other Control Boards. Memory Capacity for 1000 Codes. Slot for Connection to Programming Keypad.

GA-T35

List Price Incl. VAT: £15.52 £11.31 (£13.57 inc vat)

T35 adjustable hinge with plate for 40mm box section for swing gates.

GA-SSPRCLD202

List Price Incl. VAT: £154.97 £113.00 (£135.60 inc vat)

FAAC-104471

List Price Incl. VAT: £326.40 £272.00 (£326.40 inc vat)

The FAAC 412 AUTOMATION SYSTEM for swing gates comprises two electromechanical operators which drive the gate leaves by means of a worm screw.The system locks mechanically, therefore no electric lock is required.

GA-CR35P

List Price Incl. VAT: £45.59 £33.24 (£39.89 inc vat)

Range of wrap-round hinges with weldable collar, adjustable flange nut, or fixing plate for brick piers, and joint pins to suit 35-60mm RHS supplied seperately. M18, M20, M24 thread. For Swing Gates.

RT-H70/200AC/BOX

List Price Incl. VAT: £300.94 £175.55 (£210.66 inc vat)

Control unit for 2 motors 230Vac with slow down, in plastic box. For all Roger Technology 230v swing gate systems.

CAME-KIT-FROGAE-P

List Price Incl. VAT: £1,777.50 £1,296.09 (£1,555.31 inc vat)

GA-NEWOMEGAZ3

List Price Incl. VAT: £97.28 £70.94 (£85.13 inc vat)

Concrete down ground track for sliding gates and industrial doors, 20mm round bar track for O groove wheels, supplied in modular 3m lengths, galvanised finish. 1.5mm steel body below concrete with 3mm hard carbon steel top rail. Maximum gate weight 1200kg

BFT-E5-BT-A12-TWIN-KIT

List Price Incl. VAT: £1,334.66 £973.19 (£1,167.83 inc vat)

The E5 is an extremely compact non-locking 24V electromechanical operator with articulated arm for pedestrian swing gates, suitable for residential and commercial areas. The compact dimensions allow the E5 BT A to be installed on small pillars and columns (minimum required width 8cm).

BIR-EX0010005M-2000

List Price Incl. VAT: £180.00 £131.25 (£157.50 inc vat)

ExpertLine 49mm Safety Edge Kit 2m, 1 x Resistor, 2 x 5m Cables

BFT-KIT-ELI-AC-A40

List Price Incl. VAT: £1,628.53 £1,187.47 (£1,424.96 inc vat)

This electro-mechanical double kit is suitable for leafs up to a width of 4m up to 500kg in weight. With slowdown on its opening and closing cycle, the motor can protect itself and reduce noise by not banging into hard stops. As the motor nearly reaches the open and closed position it will start to slow coming to a gentle stop.

GA-TH827/12

List Price Incl. VAT: £45.48 £33.16 (£39.79 inc vat)

BFT-MAXIMA-BRACKET-SKIRT

List Price Incl. VAT: £73.46 £53.57 (£64.28 inc vat)

Skirt - Bracket for full barrier skirt for Maxima Ultra 36

COMELIT-6602W

List Price Incl. VAT: £674.50 £491.82 (£590.18 inc vat)

BIR-XL_49mm_5EDGE_IP

List Price Incl. VAT: £809.15 £590.00 (£708.00 inc vat)

10m of 49mm Expert System Safety Edges Installer Pack = 5 x Safety edges inc connectors

BFT-PCELL-ERIS

List Price Incl. VAT: £208.16 £151.79 (£182.15 inc vat)

Pair of wireless photocells with possibility of management of an IR or resistive active safety edge. Possibility of directing the beam 180° horizontally and 20° vertically

BFT-IGEA-SINGLE-KIT

List Price Incl. VAT: £1,132.63 £825.88 (£991.06 inc vat)

Igea is a 230v electromechanical operator with an articulated arm, designed for residential use. It is suitable for swing gate leafs of up to 2.5 metres and weighing up to a maximum of 250 kg. They are ideal for installation on large-size pillars as the articulated levers allow opening up to 125°.